Daily inspection of Marine radar

With the continuous progress of science and technology, Marine radar is also constantly updated. Ships equipped with radar can provide necessary observation means for seafarers when the visibility is poor. It can also be used for navigation avoidance, ship positioning and so on. Marine radar is also a kind of scientific and technological equipment. Since it is an equipment, it is necessary to do a good job in daily inspection to ensure the correct use of radar in the process of sailing. The specific inspection of Marine radar is as follows:

1. Preliminary inspection of Marine radar:

The initial inspection is to check whether the type and quantity of the Marine radar recorded on the ship safety equipment certificate are consistent with the actual equipment; Whether there are operating procedures for this model; Radar operation manual; Use record (radar diary); Maintenance record; Whether there are pasting operation steps and matters needing attention on the bridge; Appearance of equipment; Whether the radar antenna is abnormal and whether the radar blind spot map is posted. If these inspections are satisfactory, it can be preliminarily determined that the radar system of the ship is in normal condition; otherwise, the ship's radar is likely to be in abnormal condition, which should be further checked.

2, the Marine radar operational inspection: let drivers according to operation procedure startup power source, listen to the sound power supply, open the "ready" status, three minutes later whether available (equipment, after connect from cold should be able to normal work within 4 min), can open from to use not more than four minutes, open after observing the rotation of the radar antenna.

Asked whether the crew master Marine radar operating procedures, and let the crew oral or practical radar, depending on the oral or the actual operation is correct, skilled, near by fixed or moving targets at the same time, according to the weather and sea condition, adjusted required drivers to radar, the target detection, tracking and measuring, to judge whether the work conditions of the radar is normal, the operator is qualified. Spot check drivers for radar mapping.

To do a good job in the inspection of Marine radar is not only responsible for the safety of their own lives, but also for others, and even for each family's responsibility. The specific inspection method can refer to the above, of course, can also be based on the Marine radar operating instructions to view the relevant inspection items, if you do not find a suitable inspection method, also welcome to call us, we will be more professional knowledge to serve you.